BS-E65

BS-E65 (previously SLBM-A/B) bellow components is a stationary welded metal bellow component. The stationary design make it more suitable for operations with relatively high speed rotation and / or relatively large shaft-to-chamber misalignment. External drive lug is used in this component to substantially reduce the stress to the metal bellows.

BS-E65 has similar installation size as Eagle Burgmann MFL65.

If the listed constructing material listed below is not the one you are looking for, please contact us to see whether we can accomondate your needs.

Construction

  Standard Optional
Bellows:Inconel 71817-4 PH, HC-276
Secondary Seal:----
Seal Face:Antimony Impregnated
Carbon Garphite
SiC
Ring Adaptor:Carp. 42Duplex
Adaptor:SS 316LSS 304

Operating Limit (Non-Concurrent*)

Non-Concurrent* Limit
Temperatures: Inconel 718: -40oF to 750oF (-40oC to 400oC)
17-4 PH: -4oF to 392oF (-20oC to 200oC)
Pressure: Externally pressurized: Up to 363 psi / 25 bar.
Speed:Up 9900 fpm or 50 m/s

* These operating limits are non-concurrent. In general, an incease in the seal size, or temperature, or rotating speed can reduce the maximum operating pressure limit of the metal bellow component.

Size Chart

unit: inch
d1(min) d1(max) d2 d3 L1 (W. L.)
0.984 1.181 1.240 2.165 1.358
1.220 1.378 1.417 2.323 1.299
1.417 1.575 1.614 2.559 1.201
1.614 1.772 1.811 2.717 1.398
1.811 2.008 2.047 3.012 1.594
2.047 2.362 2.402 3.307 1.260
2.402 2.756 2.795 3.740 1.496
2.795 3.228 3.287 4.409 1.614
3.268 3.465 3.524 4.724 1.850
3.504 3.937 3.976 5.118 1.850
unit: mm
d1(min) d1(max) d2 d3 L1 (W. L.)
25.00 30.00 31.50 55.00 34.50
31.00 35.00 36.00 59.00 33.00
36.00 40.00 41.00 65.00 30.50
41.00 45.00 46.00 69.00 35.50
46.00 51.00 52.00 76.50 40.50
52.00 60.00 61.00 84.00 32.00
61.00 70.00 71.00 95.00 38.00
71.00 82.00 83.50 112.00 41.00
83.00 88.00 89.50 120.00 47.00
89.00 100.00 101.00 130.00 47.00